Before you process, you should grind material, and you might consider drying it too. Watch the videos below for more information.

How to Grind Material Properly:

Using an oven to decarboxylate plant material:

 

Grinder

Robot Coupe Blixer 3

$2,700 (includes ground shipping)

Grinding the plant material will increase the amount of material that can be put into the extraction vessel and will increase the surface area that is exposed to the CO2 during extraction.   The Robot Coupe Blixer 3 performs particle reduction fast and efficiently!  The Blixer 3 will grind 300-400 grams of dried trim/flower down to approximately 200 microns in 3-4 seconds!

  • Power 1.5 HP
  • 110V, Single Phase, Nema # 5-15P (standard household plug)
  • Speed(s) 3450 rpm
  • Bowl capacity 3.5 Qt
  • Dimensions 16 15/16″ x 11 13/16″ x 8 3/4″
  • Approx. shipping weight 30 lbs.
  • Standards ETL electrical sanitation Listed / cETL (Canada)
  • Made in the USA!

More info on the Blixer 3 can be found here: http://www.robot-coupe.com/en-usa/catalogue/blixer,33/blixer-3,864/


Decarb/Drying Oven - Benchtop

Cascade Sciences CDO-5 Benchtop Dry / Decarb Oven

$5,700 (Includes freight shipping – lift gate or forklift required)

Drying plant material prior to extraction will reduce the moisture content of the extracted oils.  Decarboxylating will activate the material, converting THC-A and CBD-A into THC and CBD.  Extractions using decarboxylated material will have faster extraction times and increased yields compared to extractions using non-decarboxylated material.

  • Capacity – Approximately 5 Pounds Plant Material
  • 2 Adjustable Shelves (20.75” x 19”)
  • Volume – 4.9 Cubic Feet
  • Temperature Range – 36 °F Above Room Temp to 350 °F
  • Dimensions –
    Interior: W 21″ x H 20.75″ x D 19.44″
    Exterior: W 34.1” x H 38.75” x D 28.1”
  • Temp Rated, Large Capacity Mesh Bags For Easy Loading Ground Organic Material
  • Humidity Sensor Displays Relative Humidity / Moisture Levels During Process
  • Fast Heat-Up: 28 Minutes To 300°F / Uniformity: +/- 3°F
  • Easy Timer For Automatic Operation
  • TUV Certified. CSA & CE Approved
  • Food Lab Grade Material Construction. Made in USA. 1 Year Warranty
  • 120V / 1ph / 14FLA NEMA 5-15P Plug Supplied

More info on the CDO-5 can be found here: https://cascadesciences.com/product/cdo-5-benchtop-dry-decarb-oven/

Spec sheet can be found here: Spec Sheet CDO-5 CDO-28 dry and decarb ovens Cascade


Decarb/Drying Oven - Large Scale

Cascade Sciences CDO-28 Large Scale Dry / Decarb Oven

$10,700 (Includes freight shipping – lift gate or forklift required)

Drying plant material prior to extraction will reduce the moisture content of the extracted oils.  Decarboxylating will activate the material, converting THC-A and CBD-A into THC and CBD.  Extractions using decarboxylated material will have faster extraction times and increased yields compared to extractions using non-decarboxylated material.

  • Capacity – Approximately 50 Pounds Plant Material
  • 6 Adjustable Shelves (20.75” x 19”)
  • Volume – 28 Cubic Feet
  • Temperature Range – 36 °F Above Room Temp to 350 °F
  • Dimensions –
    Interior: W 21″ x H 20.75″ x D 19.44″
    Exterior: W 37.5” x H 78.83” D 35”
  • Temp Rated, Large Capacity Mesh Bags For Easy Loading Ground Organic Material
  • Humidity Sensor Displays Relative Humidity / Moisture Levels During Process
  • Fast Heat-Up: 24 Minutes To 300°F / Uniformity: +/- 3°F
  • Easy Timer For Automatic Operation
  • TUV Certified. CSA & CE Approved
  • Food Lab Grade Material Construction. Made in USA. 1 Year Warranty
  • 220V / 1ph / 26 FLA

More info on the CDO-28 can be found here: https://cascadesciences.com/shop/dry-decarb-ovens/cdo-28/

Spec sheet can be found here: Spec Sheet CDO-5 CDO-28 dry and decarb ovens Cascade


Got questions?

Call 740 809-1177 or email Mike Mulligan if you’re on the East Coast or in Canada.

Call 740 809-1170 or email Scott Sondles if you’re on the West Coast or International.

Call 740 809-1171 or email Nick Yerico if you’re in the Midwest or in the South.